MEDI's low cost zero drop solar chargers are available in various ranges 12V to 120V and 5A to 60A which is compatible with MEDI's inverter design and can be used with other inverter designs as well. More...
Tube lights while manufacturing undergoes different process viz. cutting, cleaning, vacuuming, cap fitting etc. During each process the tube light may become defective. If the defective tube is detected and duly rejected after each process, we can avoid it from undergoing the rest of the manufacturing process and reduce the wastage.
There are a lot of devices that check the tubes after each process. H.F generator is one among them and is used to check the tube after the gas filling, and before any further process is done on it. Conventional choke and starter method can't be used since the test is to be done before the caps are fitted.
Technically H.F generator is a device that generate a high frequency electro-static field. This field is strong enough to ionize low pressure gas filled tubes near it and make them glow. Since the H.F generator do not need any physical or electrical contact, it is very convenient to check the tubes before fixing the connection terminals.
3-Terminal SMPS
The SMPS suitable for replacing ordinary series-drop 78XX series regulators.